send link to app

GfA+


4.4 ( 8624 ratings )
工具 效率
开发 GfA Elektromaten GmbH & Co. KG
自由

The GfA+ App is available for adjusting and servicing the door. Together with the GfA-Stick (GfA part no. 20003696), the app enables readout and display of important data from GfA door controls* using a mobile device. These include, for example:
• Serial number, software, cycle counter reading
• Connected hardware (e.g. sensor)
• Current programming
• Display of the last 128 events on the door
• Fault memory with guide to correct faults

*from generation TS-B (TS 959, TS 970, TS 971)

The data can be conveniently managed in the GfA portal accessible on the GfA website:

www.gfa-elektromaten.com

After uploading over the Internet, the structured and permanent data are available in the portal without data limitations. Monitoring several doors and locations is possible.

Save time when testing, servicing and repairing the door. Use the GfA+ App and GfA-Stick.

_________________________________

We look forward to hearing from you. If you have any questions or suggestions, please send an E-mail to: [email protected]
_________________________________

Regrettably, we cannot guarantee that the system will be fully available at all times, for example, due to unforeseeable technical faults or necessary updates.

Our terms of use and data protection declaration also apply. Both are available under the following link:

https://gfa-elektromaten.com/en/DE/terms_of_use.html
https://gfa-elektromaten.com/en/DE/privacy_policy.html

_________________________________

Registration in the GfA-Portal:
www.gfa-elektromaten.com

List of references:
Controls starting with generation TS-B:
• TS 959
• TS 970
• TS 971

Older versions of the GfA+ app will only run for a limited time. Please switch to the current version available here as soon as possible.